Game of Thrones Targaryen Dragon Insignia Vinyl Die Cut Decal in Black

$4.20 (USD) + shipping 

Available at Dreamer’s Little Dream Shoppe are vinyl decals for your portable electronic devices.

This Game of Thrones Targaryen Dragon die cut vinyl decal is very easy to apply, durable, and comes with contact tape for easy application. Instructions will be included with each decal. The vinyl is also easy to remove, but CANNOT be reapplied to another surface. Apply to mostly any flat clean surface (3DS, Laptops, Car body/windows, XBOX, PS3, etc.)This is NOT a sticker. This means that only the design will show, the background will be the color of whatever surface you choose to put the decal on.

Please verify your shipping address before placing your order.

*Characters are trademark/copyright of their respectful owners*

Material: Avery Dennison Cal Vinyl 2.5 millimeters
•Durability: Up to 3 years outdoor & 5 years indoor
•Adhesive: Clear, Solvent-based, permanent adhesive. Decals may be removed but are NOT reusable.
•Color: Black. (Please see product image for reference. Colors may vary slightly due to differences in computer display capabilities.)
•Size: 3in H X 3in W

*APPLICATION INFORMATION & INSTRUCTIONS

SUGGESTED APPLICATION SURFACES
•Vinyl decals will stick to virtually any smooth, clean surface such as vehicle windows, glass indoor & outdoor windows, laptops, cell phones, tablets, mugs, glass and ceramic cups, tumblers, mirrors, walls, appliances, doors, etc.
•Decals can also be applied to the painted surface of your vehicle.
•Be advised: Decals can be applied to other painted surfaces such as walls, doors, cabinets, and so on but can and may damage paint upon removal.

YOUR VINYL DECAL COMES LAYERED IN 3 PIECES
•LAYER 1 is the backing paper – The paper backing holds the decal in place, protects from dust and debris, and is removed first before applying to a flat, clean surface.
•LAYER 2 is the vinyl decal – The decal design itself that will be adhered to your surface of choosing.
•LAYER 3 is the clear transfer tape – Used to hold the decal together, protect the decal from dust and debris, and is the final layer removed during the application, leaving only your decal behind.

STEP 1 – CLEAN THE APPLICATION AREA
•Clean the smooth surface with a mild soap and water solution.
•Wipe surface with a clean cloth and dry thoroughly.
•Where safe, wipe the surface with rubbing alcohol and dry thoroughly.
•DO NOT: Use Windex or similar household cleaning products because they will leave a residue behind that can prevent the decal from adhering correctly.
•ALSO NOTE: Surface temperature should be between 50 and 90 degrees Fahrenheit (between 10 and 32 degrees Celsius) at time of application, especially if applying outdoors.

STEP 2 – PREP THE DECAL
•Using a squeegee / credit card / or similar smooth flat item and wipe the top of the decal (clear side) several times on a hard, smooth surface to ensure decal adheres to the clear transfer tape thoroughly.

STEP 3 – PEEL OFF THE OPAQUE BACKING PAPER
•Carefully peel the decal away from the backing paper. The decal should adhere to the clear transfer tape only.

STEP 4 – APPLY DECAL FACE DOWN TO SURFACE OF CHOICE
•Carefully apply decal sticky side down on your clean, flat surface, starting with one end of the design first.
•Using your squeegee / credit card / or similar smooth flat item, begin applying the rest of the decal to the surface. Apply evenly to avoid irregularities and bubbles, starting from the same side at which you began placement and working your way to the other side of the decal.

STEP 5 – PRESSING OUT AIR BUBBLES
•Use squeegee / credit card / or similar smooth flat item to finish pressing out air bubbles and ensure decal has securely and evenly adhered to the surface.

STEP 6 – WAIT
•Now, wait for 2 to 3 minutes to pass before moving on to the next step. The wait time will allow the decal to throughly bond to your chosen surface.

STEP 7 – PEEL CLEAR TRANSFER TAPE
•Slowly peel clear transfer tape away from the to reveal your decal. In the even your decal still tries to cling to the transfer tape, reuse your squeegee / credit card / or similar smooth flat item to go over the tape again before completing the tape removal.

IMPORTANT
•To ensure the best result; avoid water and extreme temperature where possible for 24 hours after application.
•This wait time will allow the decal adhesive time to fully bond to the surface.
•DO NOT power wash or pressure wash the location of your decal as it may cause water seepage under the decal or loosening of adhesive backing.
•AVOID using solvents when cleaning over the item as they can discolor or degrade the quality of your decal quickly and interfere with the decal’s adhesion to the chosen surface.

Questions or Comments? Please refer to the FAQ section of my store or send a conversation my way and I will do my best to aide you with your particular situation. Thank you for choosing Dreamer’s Lil Dream Shop!

 

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

w

Connecting to %s